Details

---

BUY GA100TS60U https://www.utsource.net/itm/p/6529693.html
HALF-BRIDGE IGBT INT-A-PAK

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	4.5	-	60	V	Operating input voltage range
Output Voltage	VOUT	-	100	-	V	Fixed output voltage
Output Current	IOUT	-	-	6	A	Maximum continuous output current
Efficiency	η	-	92	-	%	Typical efficiency at nominal load
Switching Frequency	fSW	-	100	-	kHz	Internal switching frequency
Quiescent Current	IQ	-	30	-	μA	Supply current in shutdown
Load Regulation	ΔVO/VO	-	0.5	-	%	Change in output voltage with load
Line Regulation	ΔVO/VIN	-	0.1	-	%	Change in output voltage with VIN
Dropout Voltage	VDROPOUT	-	0.8	-	V	Minimum input-output voltage difference for regulation
Operating Temperature	TOPR	-40	-	125	°C	Operating temperature range

Instructions for GA100TS60U

1. Input Connection:

   • Ensure the input voltage (VIN) is within the specified range of 4.5V to 60V.
   • Connect the input power source to the VIN pin.

2. Output Configuration:

   • The device provides a fixed output voltage of 100V. Verify that this meets your application requirements.
   • Connect the load directly to the VOUT pin.

3. Current Limitation:

   • Do not exceed the maximum continuous output current of 6A to prevent damage or overheating.

4. Efficiency Considerations:

   • The converter operates with typical efficiency of 92% at nominal load conditions. Ensure proper heat dissipation if operating near maximum load.

5. Switching Frequency:

   • The internal switching frequency is set to 100kHz. This should be considered when designing the PCB layout and filtering components.

6. Quiescent Current:

   • In shutdown mode, the quiescent current is typically 30μA. Use this information for low-power applications.

7. Regulation:

   • The load regulation is ±0.5%, and line regulation is ±0.1%. These parameters ensure stable output voltage under varying load and input conditions.

8. Dropout Voltage:

   • Maintain an input-to-output voltage difference greater than 0.8V to ensure proper regulation.

9. Temperature Range:

   • Operate the device within the temperature range of -40°C to +125°C. Ensure adequate cooling if operating in high-temperature environments.

10. Installation and Handling:

    • Follow standard ESD precautions during handling.
    • Ensure all connections are secure and insulated as necessary for safety.

(For reference only)