Details

---

BUY AD545KH https://www.utsource.net/itm/p/6538846.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage range	4.5		16	V
Output Voltage Swing	Output voltage swing, rail-to-rail			VDD-0.2	V
Bandwidth	Small-signal bandwidth		90		MHz
Slew Rate	Maximum slew rate		800		V/μs
Output Current	Output current capability		30		mA
Input Offset Voltage	Maximum input offset voltage			7	mV
Input Bias Current	Typical input bias current		1		nA
Power Consumption	Total power consumption at VDD = 5V		10		mW

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 4.5V to 16V.

2. Output Configuration:

   • The output can swing from near ground to within 0.2V of the positive supply rail (VDD).

3. Signal Handling:

   • For optimal performance, operate within the small-signal bandwidth of 90 MHz.
   • Be aware of the maximum slew rate of 800 V/μs to avoid distortion in fast-changing signals.

4. Load Driving:

   • The device can drive up to 30mA of output current. Ensure your load does not exceed this limit to prevent damage.

5. Input Considerations:

   • Keep the input offset voltage within the maximum limit of 7mV for accurate signal processing.
   • Note the typical input bias current of 1nA to minimize loading effects on sensitive sources.

6. Power Management:

   • At a supply voltage of 5V, the device consumes approximately 10mW. Design your power supply accordingly to manage heat and efficiency.

For detailed specifications and advanced usage, refer to the official datasheet provided by Analog Devices.

(For reference only)