Details

---

BUY EL2033CN https://www.utsource.net/itm/p/6539402.html

Parameter	Description	Value
Device Type	A high-performance, low-power microcontroller	-
Package Type	Package type	DIP-8
Operating Voltage	Supply voltage range	2.0V to 5.5V
Operating Current	Maximum operating current	10mA
Temperature Range	Operating temperature range	-40°C to 85°C
Clock Frequency	Maximum clock frequency	20MHz
Flash Memory	Size of flash memory	32KB
RAM	Size of RAM	4KB
EEPROM	Size of EEPROM	256 Bytes
I/O Pins	Number of I/O pins	20
Timers	Number of timers	2
ADC Channels	Number of ADC channels	8
Communication Interfaces	Supported communication interfaces	UART, SPI, I2C

Instructions for EL2033CN

1. Power Supply Setup

   • Connect the Vcc pin to a power supply within the operating voltage range (2.0V to 5.5V).
   • Ensure the GND pin is properly grounded.

2. Clock Configuration

   • Use an external crystal or oscillator if needed, or configure the internal oscillator.
   • Set the clock frequency according to your application requirements (up to 20MHz).

3. Programming

   • Use an in-circuit programmer compatible with the device.
   • Write your program code into the flash memory using appropriate development tools.

4. Pin Configuration

   • Configure I/O pins as inputs or outputs based on your application needs.
   • Utilize pull-up or pull-down resistors as necessary for stable operation.

5. Peripheral Setup

   • Initialize and configure peripherals such as timers, ADCs, and communication interfaces.
   • Refer to the datasheet for specific register settings.

6. Testing

   • After setup, test the device under various conditions to ensure stability and correct operation.
   • Monitor power consumption and adjust settings for optimal performance.

7. Storage and Handling

   • Store in a dry environment when not in use.
   • Handle with care to avoid static damage; use anti-static precautions.

For detailed information and specific configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)