Details

---

BUY 3510AM https://www.utsource.net/itm/p/6539710.html

Parameter	Description	Value
Part Number	Product Identifier	3510AM
Type	Device Category	MEMS Gyroscope
Interface	Communication Protocol	SPI, I2C
Power Supply	Operating Voltage Range	1.71 V to 3.6 V
Current	Supply Current	900 μA (typical)
Bandwidth	Output Data Rate	12.5 Hz to 800 Hz
Sensitivity	Angular Rate Sensitivity	125 LSB/°/s
Noise	Angular Random Walk	0.02 °/s/√Hz
Temperature Range	Operating Temperature Range	-40 °C to +85 °C
Package	Encapsulation Type	LGA
Dimensions	Package Size	3 x 3 x 0.9 mm

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 1.71 V to 3.6 V.
   • Connect the power supply pins (VDD and GND) correctly to avoid damage.

2. Communication Setup:

   • Choose either SPI or I2C interface based on your system requirements.
   • Configure the communication settings according to the device datasheet.

3. Configuration:

   • Use the provided registers to configure the gyroscope settings such as output data rate and bandwidth.
   • Refer to the register map in the datasheet for detailed configuration options.

4. Data Reading:

   • Read angular rate data from the output registers using the selected interface protocol.
   • Apply the sensitivity factor to convert raw data into degrees per second.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40 °C to +85 °C to ensure accurate measurements.
   • Monitor temperature effects on performance if operating near the limits.

6. Mounting Orientation:

   • Ensure proper mounting orientation for accurate measurement of angular rates.
   • Follow mechanical installation guidelines provided in the datasheet.

7. Handling Precautions:

   • Handle with care to prevent damage to the sensitive MEMS structure.
   • Avoid exposing the device to excessive shock or vibration.

(For reference only)