Details

---

BUY LM106H https://www.utsource.net/itm/p/6540115.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	15	30	V
Output Current (Max)	Iout	-	20	40	mA
Operating Temperature	Temp	-40	-	85	°C
Input Offset Voltage	Vio	-	2	5	mV
Slew Rate	SR	-	0.5	1	V/μs
Quiescent Current	IQ	-	4	8	mA

Instructions for LM106H

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) between 4.5V and 30V to the Vcc pin.
   • Ensure a stable power supply to avoid fluctuations affecting performance.

2. Output Configuration:

   • The maximum output current should not exceed 40mA to prevent damage.
   • For optimal performance, operate within the typical range of 20mA.

3. Temperature Considerations:

   • Operate within the temperature range of -40°C to 85°C to ensure reliable operation.
   • Avoid exposing the device to temperatures outside this range.

4. Input Signal Handling:

   • Be mindful of the input offset voltage which can range from 2mV to 5mV.
   • This parameter is critical for precision applications.

5. Slew Rate:

   • The typical slew rate is 0.5V/μs, with a maximum of 1V/μs.
   • Design circuits considering this parameter to avoid signal distortion.

6. Quiescent Current:

   • Keep an eye on the quiescent current, typically around 4mA but can go up to 8mA.
   • Efficient power management is crucial for battery-operated devices.

7. General Handling:

   • Follow standard precautions for handling electronic components to prevent electrostatic discharge (ESD) damage.
   • Ensure proper heat dissipation if operating at higher temperatures or currents.

(For reference only)