Details

---

BUY LT1039CN https://www.utsource.net/itm/p/6540163.html

Parameter	Min	Typical	Max	Unit	Description
Supply Voltage	2.7	-	30	V	Operating supply voltage range
Input Offset Voltage	-	15	50	μV	Maximum input offset voltage at 25°C
Input Bias Current	-	1	10	nA	Input bias current
Slew Rate	-	0.6	-	V/μs	Slew rate
Bandwidth	-	4	-	MHz	Unity gain bandwidth
Output Swing	-	-	-	V	Output swing to rails
Quiescent Current	-	2.8	-	mA	Supply current per amplifier
Common Mode Rejection	-	90	-	dB	Common mode rejection ratio
Power Supply Rejection	-	85	-	dB	Power supply rejection ratio

Instructions for Using LT1039CN

1. Supply Voltage Setup:

   • Ensure the supply voltage is within the specified range of 2.7V to 30V. Exceeding this range can damage the device.

2. Input Configuration:

   • Keep the input bias current in mind when selecting external components like resistors to avoid significant errors in the signal.

3. Output Load:

   • The output swing capability should be considered when connecting loads. It may not reach the supply rails, depending on the load and supply voltage.

4. Power Consumption:

   • Monitor the quiescent current especially in low-power applications to ensure efficient power usage.

5. Noise and Interference:

   • Utilize the common mode rejection and power supply rejection features to minimize noise and interference in the circuit.

6. Stability Considerations:

   • Given the unity gain bandwidth and slew rate, ensure that the application does not require faster response times or higher frequencies beyond the capabilities of the LT1039CN.

7. Temperature Range:

   • While not explicitly stated in the table, consider the operating temperature range for reliable operation, typically from -40°C to 125°C for industrial-grade components like the LT1039CN.

(For reference only)