Details

---

BUY MC1429G https://www.utsource.net/itm/p/6540319.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5	5.5	V
Input High Voltage	VIH	IIL = -1 μA	3.0		5.0	V
Input Low Voltage	VIL	IIH = 1 μA	0		1.5	V
Output High Voltage	VOH	IO = -1 mA, VCC = 5V	2.7		5.0	V
Output Low Voltage	VOL	IO = 16 mA, VCC = 5V	0		0.5	V
Propagation Delay Time	tpd	VCC = 5V, Tamb = 25°C		9		ns
Power Dissipation	PD	Maximum Continuous			600	mW

Instructions for MC1429G

1. Power Supply: Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V to avoid damage and ensure reliable operation.

2. Input Levels:

   • For a valid high input (VIH), the voltage must be between 3.0V and 5.0V.
   • For a valid low input (VIL), the voltage should be between 0V and 1.5V.

3. Output Levels:

   • When operating under standard conditions (VCC = 5V), the output high voltage (VOH) should be at least 2.7V.
   • The output low voltage (VOL) should not exceed 0.5V when sinking up to 16mA.

4. Propagation Delay: The typical propagation delay time (tpd) is 9 nanoseconds under standard operating conditions (VCC = 5V, ambient temperature = 25°C).

5. Power Handling: Do not exceed the maximum power dissipation of 600mW to prevent overheating and potential component failure.

6. Operating Temperature Range: Ensure the device operates within its specified temperature range to maintain performance and reliability.

7. Handling Precautions: Handle with care to avoid electrostatic discharge (ESD) damage. Use proper ESD protection measures during installation and handling.

8. Mounting and Connections: Follow recommended PCB layout guidelines for optimal performance and thermal management. Ensure all connections are secure and correctly wired according to the pin configuration.

(For reference only)