Details

---

BUY ADG513BR https://www.utsource.net/itm/p/6540516.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage (VDD)	4.5		16	V	Power supply voltage
Off Isolation			50	dB	Channel-to-channel isolation at VDD = 5V
Leakage Current			1	nA	Maximum leakage current at VDD = 16V, TA = 25°C
Input Capacitance			7	pF	Input capacitance at VDD = 5V
Switching Time			10	ns	Propagation delay time at VDD = 5V
ON Resistance (RON)		1.8	3	Ω	Typical on resistance at VDD = 5V, TA = 25°C
RON Flatness			0.6	Ω	Variation in RON over analog signal range
Charge Injection			3	pC	Charge injected into the signal path

Instructions for ADG513BR

1. Power Supply:

   • Ensure the power supply voltage is within the specified range of 4.5V to 16V.

2. Signal Path:

   • The device can handle signals up to the supply voltage. Be cautious not to exceed the maximum ratings.

3. Leakage Considerations:

   • Keep the leakage current in mind when designing circuits that require low noise or high impedance inputs.

4. Capacitance Management:

   • Account for the input capacitance in your design to prevent unwanted signal distortion or timing issues.

5. Switching Performance:

   • For optimal performance, consider the switching time and charge injection parameters to avoid transient errors in your application.

6. Thermal Management:

   • Although not detailed here, ensure adequate thermal management as per the datasheet recommendations to maintain reliable operation.

7. Layout Recommendations:

   • Follow good PCB layout practices to minimize parasitics and ensure reliable switching performance.

For more detailed specifications and advanced instructions, refer to the official Analog Devices datasheet for the ADG513BR.

(For reference only)