Details

---

BUY LM158H https://www.utsource.net/itm/p/6540999.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	-16		+16	V
Input Offset Voltage	VIO	@ TA = 25°C	-0.7	3	7	mV
Input Bias Current	IB	@ TA = 25°C	80	450	800	nA
Input Offset Current	IOS	@ TA = 25°C	-10	45	100	nA
Large Signal Voltage Gain	AV	@ RF = 10kΩ, RL = 2kΩ	50	100	200	dB
Slew Rate	SR	@ RF = 10kΩ, RL = 2kΩ	0.5		1	V/μs
Output Short-Circuit Duration	tSC	Continuous				Indefinite
Quiescent Current	IQ	@ TA = 25°C	0.4	0.7	0.8	mA
Common Mode Rejection Ratio	CMRR	@ TA = 25°C	60	85	90	dB
Power Supply Rejection Ratio	PSRR	@ TA = 25°C	60	85	90	dB

Instructions for Use:

1. Power Supply:

   • The LM158H can operate from a single supply or split supplies.
   • For single-supply operation, the voltage range is typically 3V to 32V.
   • For dual-supply operation, the voltage range is ±1.5V to ±16V.

2. Input Configuration:

   • Ensure that the input voltages remain within the common-mode input voltage range specified in the datasheet.
   • Avoid exceeding the maximum differential input voltage rating to prevent damage.

3. Output Load:

   • The output can drive loads directly but consider using an external buffer for heavy loads to maintain performance and stability.
   • Keep the output load impedance within the recommended range to ensure proper operation.

4. Stability Considerations:

   • Incorporate appropriate compensation capacitors if necessary to maintain stability, especially when driving capacitive loads or using high-gain configurations.
   • Follow the guidelines in the datasheet for frequency compensation to avoid oscillation.

5. Thermal Management:

   • Ensure adequate heat dissipation, particularly at higher power levels or in confined spaces.
   • Monitor junction temperature to stay within safe operating limits.

6. Handling Precautions:

   • Handle with care to avoid static discharge which can damage the internal components.
   • Store in a controlled environment away from excessive humidity and temperature extremes.

(For reference only)