Details

---

BUY AD584JH https://www.utsource.net/itm/p/6541654.html

Parameter	Description	Min	Typ	Max	Unit
Output Voltage	Precision voltage reference output		7.0		V
Initial Accuracy	Deviation from nominal value at 25°C	-0.1		0.1	%
Temperature Coefficient	Change in output voltage per degree Celsius	-5		5	ppm/°C
Load Regulation	Change in output voltage for specified load current change		0.5		ppm/mA
Line Regulation	Change in output voltage for specified line voltage change		0.5		ppm/V
Dropout Voltage	Minimum input-to-output voltage difference for regulation		2.0		V
Operating Temperature	Range of temperatures over which device operates within specifications	-40		85	°C
Supply Current	Current drawn from the supply under operating conditions		10		mA

Instructions:

1. Power Supply Connection: Connect the positive supply voltage to the "V+" pin and the negative supply or ground to the "GND" pin.
2. Output Configuration: The AD584JH provides a precision voltage reference on the "VOUT" pin. Ensure that this pin is properly decoupled with a capacitor close to the device, typically 0.1 μF ceramic.
3. Temperature Considerations: For optimal performance, ensure the device operates within the specified temperature range (-40°C to +85°C). External temperature changes can affect the output voltage; use the temperature coefficient to estimate these changes.
4. Load Regulation: To minimize load-induced errors, keep the load current stable or within the specified limits. Use appropriate buffering if necessary.
5. Line Regulation: Keep the supply voltage variations minimal to avoid affecting the output voltage. Adequate bypass capacitors on the power supply lines are recommended.
6. Dropout Voltage: Ensure that the input voltage is at least the dropout voltage (2V) higher than the output voltage to maintain regulation.
7. Supply Current: Account for the supply current (approximately 10mA) when designing the power supply circuitry.

For detailed application circuits and further information, refer to the datasheet provided by Analog Devices.

(For reference only)