Details

---

BUY NE5535N https://www.utsource.net/itm/p/6571169.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	-18		+18	V
Input Voltage Range	Vcm		-15		+15	V
Output Voltage Swing	Vos	No Load	-14		+14	V
Input Offset Voltage	Vio		-0.5	0	+0.5	mV
Input Bias Current	Iib		2			nA
Input Offset Current	Iio		-10	0	+10	pA
Large Signal Voltage Gain	Av	RL = 600Ω	100			dB
Slew Rate	SR		5			V/μs
Unity Gain Bandwidth	fT		15			MHz
Noise Voltage	en	1 kHz		3		nV/√Hz

Instructions for NE5535N

1. Power Supply:

   • Operate the NE5535N within the recommended supply voltage range of ±18V to avoid damage.
   • Ensure power supply decoupling capacitors (typically 0.1μF and 10μF) are placed close to the power pins.

2. Input Signals:

   • Keep input signals within the common-mode voltage range of ±15V to prevent distortion or damage.
   • Use appropriate input coupling capacitors if AC signals are being processed.

3. Output Load:

   • The output can swing nearly rail-to-rail but check specific application conditions.
   • Ensure the load impedance is compatible with the operational amplifier's output stage, ideally around 600Ω for optimal performance.

4. Biasing and Stability:

   • Proper biasing of inputs is crucial for linear operation.
   • Include compensation capacitors as necessary to maintain stability, especially in high-gain configurations.

5. Noise Considerations:

   • For low-noise applications, consider the noise voltage specification and choose suitable PCB layout practices to minimize external noise pickup.

6. Handling Precautions:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow standard ESD protection guidelines when soldering or handling the component.

(For reference only)