Details

---

BUY AD826AN https://www.utsource.net/itm/p/6571599.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vsupply	-	2.7	-	5.5	V
Input Offset Voltage	Vos	RL = 10kΩ, TA = 25°C	-0.3	0	0.3	mV
Input Bias Current	Ib	RL = 10kΩ, TA = 25°C	-1	0	1	nA
Input Offset Current	Ios	RL = 10kΩ, TA = 25°C	-0.1	0	0.1	nA
Common-Mode Rejection Ratio	CMRR	f = 0.1Hz to 10Hz	86	-	-	dB
Power-Supply Rejection Ratio	PSRR	f = 1kHz	84	-	-	dB
Slew Rate	SR	-	0.5	-	-	V/μs
Bandwidth	BW	G = +1, VO-PK = 1V	1	-	-	MHz
Output Voltage Swing	Voswing	RL = 10kΩ, VS = ±5V	-	±3.5	-	V

Instructions for Use:

1. Power Supply: Ensure the supply voltage is within the specified range (2.7V to 5.5V). This device can operate on a single supply or dual supplies.

2. Input Configuration: The input bias and offset currents are very low, which means this op-amp is suitable for high impedance sources. Connect the inputs carefully to avoid introducing noise.

3. Offset Voltage Adjustment: If necessary, use external components to adjust the input offset voltage for precision applications.

4. Common-Mode Rejection: For optimal performance in noisy environments, ensure that common-mode signals are properly managed using balanced input impedances.

5. Supply Rejection: To maximize power-supply rejection, decouple the power supply lines with capacitors close to the device.

6. Slew Rate Consideration: Be mindful of the slew rate when designing circuits that require fast signal transitions.

7. Output Configuration: The output voltage swing should be considered when selecting load resistors and determining the operating voltage levels.

8. Operating Temperature: Ensure that the ambient temperature does not exceed the operational limits specified by the manufacturer.

Note: Always refer to the latest datasheet from Analog Devices for the most accurate and detailed specifications and application notes.

(For reference only)