Details

---

New/Used	Package	Brand	DateCode
Used	DIP-28	MAXIM	N/A

Instructions for Using the MAX1480AEPI

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the specified range of 2.7V to 5.5V.
   • Connect VDD to a stable power source.

2. Input Voltage (VIN):

   • The input voltage should be within the range of 0V to VDD.
   • Do not exceed the supply voltage to avoid damage to the device.

3. Output Voltage (VOUT):

   • The output voltage will be proportional to the input voltage and will range from 0V to VDD.
   • Ensure the load connected to VOUT can handle the output current.

4. Bandwidth:

   • The device operates with a frequency response up to 100kHz.
   • For applications requiring higher frequencies, consider using a different device or additional filtering.

5. Input Bias Current:

   • The maximum input bias current is 1μA.
   • Use high-impedance sources to minimize errors due to bias current.

6. Quiescent Current:

   • The device consumes approximately 100μA in active mode.
   • Ensure the power supply can provide this current without significant voltage drop.

7. Shutdown Current:

   • When the device is in shutdown mode, the current consumption drops to approximately 1μA.
   • Use the shutdown pin to control power consumption in low-power applications.

8. Differential Input Range:

   • The maximum differential input voltage is 1V.
   • Exceeding this range can cause distortion or damage.

9. Common-Mode Rejection Ratio (CMRR):

   • The device has a CMRR of at least 80dB, which helps in rejecting common-mode noise.
   • Use balanced inputs to maximize CMRR performance.

10. Power-Down Time:

    • The device enters power-down mode within 1μs after the shutdown signal is applied.
    • Ensure the shutdown signal is stable and clean to avoid unintended behavior.

11. Operating Temperature Range:

    • The device is designed to operate between -40°C and 85°C.
    • Avoid operating outside this range to prevent performance degradation or damage.

12. Storage Temperature Range:

    • Store the device between -65°C and 150°C.
    • Ensure proper handling and storage conditions to maintain device integrity.

(For reference only)