Details

---

BUY CMP02EP https://www.utsource.net/itm/p/6571967.html

Parameter	Description	Value
Part Number	Component identifier	CMP02EP
Type	Device type	Comparator
Supply Voltage	Operating voltage range	2.7V to 5.5V
Input Offset	Maximum input offset voltage	±1mV
Bandwidth	Frequency range where gain is greater than 0dB	1MHz
Output Type	Configuration of output stage	Push-pull
Package	Housing type	SOT-23
Operating Temp	Temperature range for operation	-40°C to +85°C
Quiescent Current	Current consumed by the device in a non-switching state	1μA

Instructions:

1. Power Supply Connection: Connect the supply voltage (Vcc) and ground (GND) ensuring it is within the operating voltage range of 2.7V to 5.5V.
2. Input Signal Application: Apply the input signals to the non-inverting (+) and inverting (-) inputs. Ensure the input voltages do not exceed the supply voltage limits.
3. Output Load Configuration: Connect the load to the output pin, considering the push-pull output type which can both source and sink current.
4. Temperature Consideration: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
5. Low Power Operation: Be aware of the quiescent current of 1μA for low power applications.
6. PCB Layout: Use appropriate PCB layout practices, keeping signal paths short and minimizing noise interference especially for the input pins.
7. Storage Conditions: Store the component in a dry environment and handle with care to avoid electrostatic discharge (ESD) damage.

(For reference only)