Details

---

BUY OP200AZ https://www.utsource.net/itm/p/6572278.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Input Offset Voltage	Vos	Initial (Ta=25°C)	-0.5	0	+0.5	mV
Input Bias Current	Ib	Differential Input		1		pA
Input Resistance	Rin	Differential Input		10^12		Ω
Slew Rate	SR			0.4		V/μs
Bandwidth	GBW	Small Signal		1.3		MHz
Output Voltage Swing	Vosw	RL=10kΩ, Ta=25°C	-0.1		+5.0	V
Quiescent Current	IQ	Operating		60		μA

Instructions for OP200AZ

1. Supply Voltage:

   • Ensure the supply voltage is within the range of 2.7V to 5.5V for optimal performance.

2. Input Signals:

   • Keep input signals within the common-mode voltage range to avoid distortion.
   • For best accuracy, minimize input bias currents by using high impedance sources.

3. Powering the Device:

   • Connect the positive supply voltage to the Vcc pin and the negative supply or ground to the GND pin.

4. Output Configuration:

   • The output can drive loads up to 10kΩ. Adjust the load resistance as necessary for your application.

5. Operating Temperature:

   • Operate the device within the specified temperature range to maintain stability and performance specifications.

6. Handling Precautions:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper PCB layout guidelines to ensure signal integrity and reduce noise.

7. Storage and Handling:

   • Store in a dry environment and handle according to standard semiconductor handling procedures.

For detailed design considerations and specific applications, refer to the manufacturer's datasheet.

(For reference only)