Details

---

BUY OP37GP https://www.utsource.net/itm/p/6572388.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage	V+ to V-	-	36	44	V
Input Offset Voltage	Initial (25°C)	-	0.1	0.5	mV
Input Bias Current	Initial (25°C)	-	2	8	nA
Input Offset Current	Initial (25°C)	-	0.5	2	nA
Open Loop Gain	Small Signal, AOL (25°C)	-	300	-	V/mV
Slew Rate	Large Signal	-	0.7	-	V/μs
Bandwidth	Unity Gain	-	11	-	MHz
Output Short-Circuit Duration	Non-Repetitive	-	-	100	ms

Instructions for OP37GP:

1. Power Supply: Ensure the supply voltage is within the specified range of 36V to 44V.
2. Input Signals: Keep input signals within the common-mode input voltage range to avoid distortion or damage.
3. Biasing: Account for the input bias current in your circuit design to maintain stability and accuracy.
4. Temperature Considerations: The device parameters are specified at 25°C. Performance may vary with temperature changes; consult the datasheet for detailed temperature characteristics.
5. Output Protection: The device can withstand short-circuits up to 100ms non-repetitively. Avoid prolonged exposure to short circuits to prevent damage.
6. Installation: Ensure proper PCB layout and grounding to minimize noise and interference. Use bypass capacitors as recommended in the datasheet.
7. Handling: Handle with care to avoid static damage. Follow ESD protection guidelines during installation and handling.

(For reference only)