Details

---

BUY OP14CZ https://www.utsource.net/itm/p/6572512.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.7		5.5	V
Input Offset Voltage	Vos	Initial, TA = 25°C	-0.6	0	0.6	mV
Input Bias Current	IB	VIN = 0V, TA = 25°C	-10	0	10	nA
Input Offset Current	IOS	VIN = 0V, TA = 25°C	-2	0	2	nA
Common-Mode Rejection Ratio	CMRR	RTI, f = 60Hz, TA = 25°C	85			dB
Power Supply Rejection Ratio	PSRR	RTI, f = 120Hz, TA = 25°C	90			dB
Slew Rate	SR	Short Circuit Output		0.3		V/μs
Bandwidth	GBW	Small Signal		1.2		MHz
Output Voltage Swing	VOSW	RL = 10kΩ, TA = 25°C	-1.2		1.2	V

Instructions for OP14CZ

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V for optimal operation.

2. Input Signals:

   • Keep input bias and offset currents in mind when designing circuits to minimize errors.
   • The common-mode rejection ratio (CMRR) indicates the device's ability to reject unwanted common-mode signals.

3. Output Configuration:

   • For maximum output swing, ensure the load resistance (RL) is appropriate; typical values are around 10kΩ.
   • Be aware of the output voltage swing limitations which can be up to ±1.2V from the supply rails.

4. Frequency Response:

   • The gain-bandwidth product (GBW) of 1.2MHz should guide the selection of frequencies for signal processing applications.

5. Transient Response:

   • The slew rate of 0.3V/μs dictates the maximum rate of change of the output voltage, impacting performance in high-frequency or fast transient applications.

6. Environmental Considerations:

   • Specifications provided are typically at 25°C. Temperature variations may affect parameters like input offset voltage and current.

7. Handling and Storage:

   • Follow standard ESD precautions to prevent damage during handling.
   • Store in recommended conditions to avoid degradation of performance characteristics.

(For reference only)