Details

---

BUY LT1097CN8 https://www.utsource.net/itm/p/6572537.html

Parameter	Conditions	Min	Typ	Max	Unit
Supply Voltage	V+ to V-	2.7		36	V
Quiescent Current	V+ = 5V, V- = 0V		10		μA
Input Offset Voltage			2		mV
Input Bias Current	VCM = 0V		25		nA
Input Offset Current			5		nA
Open Loop Gain	f = 0 Hz		200		dB
Slew Rate			0.3		V/μs
Output Voltage Swing	RL = 10kΩ, IOL = ±1mA			±34	V
Common Mode Rejection	f = 60 Hz		90		dB
Power Supply Rejection	f = 60 Hz		86		dB
Operating Temperature	Commercial	0		70	°C

Instructions for LT1097CN8:

1. Power Supply: Ensure the supply voltage is within the range of 2.7V to 36V. The quiescent current is very low, making it suitable for battery-operated devices.

2. Input Signals: Keep input bias and offset currents in mind when selecting input resistors and capacitors to minimize errors. Use high-quality components to match the precision of the LT1097CN8.

3. Gain Configuration: For optimal performance, configure the gain based on the open-loop gain of 200 dB at 0 Hz. Adjust feedback networks carefully to avoid instability.

4. Output Load: The output can swing close to the supply rails, providing ±34V with a 10kΩ load and ±1mA current. Ensure the load resistance is appropriate for your application.

5. Temperature Range: Operate within the commercial temperature range of 0°C to 70°C to ensure reliability and accuracy. Avoid extreme temperatures that could affect performance.

6. Noise and Interference: Given the high common mode and power supply rejection ratios, the LT1097CN8 is well-suited for noisy environments. However, proper PCB layout practices should still be followed.

7. Stability and Compensation: Consider external compensation if necessary, especially for higher frequency applications, to maintain stability.

8. Handling and Storage: Follow standard handling procedures for electronic components to prevent damage from electrostatic discharge (ESD) or physical stress. Store in recommended conditions to preserve component integrity.

(For reference only)