Details

---

BUY LM194BH https://www.utsource.net/itm/p/6572836.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	-	12	40	V
Input Offset Voltage	Vio	-	2.5	7.5	mV
Input Bias Current	Iib	-	10	30	nA
Input Voltage Range	Vcm	-	0	Vcc-1.5	V
Output Voltage Swing	Vo	0.5	-	Vcc-1.5	V
Bandwidth	fT	-	4	-	MHz
Slew Rate	SR	-	0.3	-	V/μs
Operating Temperature	Temp	-40	-	85	°C

Instructions for LM194BH:

1. Power Supply:

   • Connect the supply voltage (Vcc) between 12V and 40V to the power pins of the LM194BH. Ensure that the supply voltage is stable and within the specified range to avoid damage.

2. Input Signals:

   • Apply input signals within the common-mode input voltage range (0 to Vcc - 1.5V). Avoid exceeding these limits to prevent distortion or damage.

3. Output Load:

   • The output can swing from 0.5V above ground to 1.5V below Vcc. Ensure the load connected to the output does not exceed these voltage levels.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C. Outside this range, performance may degrade, and reliability could be compromised.

5. Handling Precautions:

   • Handle the LM194BH with care to avoid static discharge, which can damage sensitive components. Use proper ESD protection measures.

6. Application Notes:

   • For optimal performance, refer to the manufacturer’s application notes for specific circuit configurations and recommended external component values.

(For reference only)