Details

---

BUY AD7513JN https://www.utsource.net/itm/p/6573037.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		4.5		5.5	V
Output Voltage Range	VOUT	VDD = 5V	0		5	V
Digital Input Voltage	VIN		0		5.5	V
Power Dissipation	PD				125	mW
Operating Temperature	TOPR		-40		85	°C
Storage Temperature	TSTG		-65		150	°C
Analog Input Resistance	RIN			1		GΩ
Offset Error	VOS	VDD = 5V	-10	0	+10	mV
Full-Scale Error	FSE	VDD = 5V	-10	0	+10	mV
Linearity Error	INL	VDD = 5V	-10	0	+10	LSB

Instructions for Use:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 4.5V to 5.5V. Stable power supply is critical for accurate operation.

2. Digital Inputs: The digital input voltage should not exceed 5.5V. Connect digital inputs to a compatible logic level source.

3. Output Configuration: The output voltage range can vary from 0V to the supply voltage VDD. Design your circuit to accommodate this range.

4. Thermal Management: The device can dissipate up to 125mW. Ensure adequate heat sinking if operating near maximum power dissipation.

5. Temperature Considerations: Operate the device within the temperature range of -40°C to 85°C. For storage, ensure temperatures do not drop below -65°C or rise above 150°C.

6. Analog Input Handling: The analog input resistance is high, approximately 1GΩ. Keep input leads short to minimize noise pickup.

7. Error Calibration: Account for potential offset and full-scale errors in your design. These are typically within ±10mV but should be calibrated if higher accuracy is required.

8. Linearity Check: Ensure that the linearity error does not affect your application's performance. It is within ±10LSB under standard conditions.

For detailed specifications and more advanced configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)