Details

---

BUY MUX16ET https://www.utsource.net/itm/p/6573201.html

Parameter	Description	Value
Part Number	MUX16ET
Function	16-Channel Multiplexer with Enable
Supply Voltage	Operating voltage range	4.5V to 5.5V
Input Channels	Number of input channels	16
Channel Selection	Method of selecting the active channel	4-bit binary input
Output Type	Type of output	Single-ended
Enable Pin	Controls whether the multiplexer is active	Active Low
Propagation Delay	Time delay for signal to pass through	8ns (typical)
Power Consumption	Current consumption in operation	10μA (max)
Package Type	Physical package	SOIC-20

Instructions:

1. Power Supply Connection: Connect the supply voltage (Vcc) and ground (GND) pins to a power source within the specified voltage range.
2. Enable Control: Ensure the enable pin (EN) is set low to activate the multiplexer. Setting it high disables all channels.
3. Channel Selection: Use the four selection lines (S0, S1, S2, S3) to choose which of the 16 input channels will be connected to the common output line. These lines should be driven by a binary value corresponding to the desired channel number.
4. Signal Routing: Once the correct channel is selected, the input signal from that channel will appear on the output pin (OUT). Ensure signals are within the voltage limits specified for reliable operation.
5. Handling Propagation Delay: Account for the propagation delay when timing your application to ensure accurate signal processing.
6. Mounting and Handling: Handle the MUX16ET carefully to avoid damage. Mount it securely on the PCB following standard practices for surface mount devices.

(For reference only)