Details

---

BUY BTS5180-2E https://www.utsource.net/itm/p/6585336.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Continuous Drain Current	ID	-	40	-	A	Ta = 25°C, VGS = 10V
Peak Pulse Current	Ipp	-	80	-	A	Tj = 150°C, tp = 1ms
RDS(on)	RDS(on)	-	7.5	-	mΩ	Ta = 25°C, VGS = 10V
Gate Threshold Voltage	VGS(th)	1.5	2.5	3.5	V	ID = 1mA
Input Capacitance	Ciss	-	2600	-	pF	VDS = 12V, VGS = 0V
Total Power Dissipation	PTOT	-	-	65	W	Ta = 25°C
Junction Temperature	Tj	-	-	150	°C	-

Instructions for BTS5180-2E:

1. Installation and Handling:

   • Handle the device with care to avoid damage to the leads.
   • Ensure proper heat sinking when operating at high currents or power levels.

2. Operating Conditions:

   • Operate within specified temperature ranges to ensure reliable performance.
   • Keep the junction temperature below 150°C to prevent thermal damage.

3. Electrical Connections:

   • Connect the gate to a suitable driver circuit that can provide the required voltage levels.
   • Ensure the source is connected to the common ground of the system.

4. Power Dissipation Management:

   • Monitor the power dissipation to stay within the maximum limit of 65W.
   • Use adequate cooling solutions if operating near maximum power levels.

5. Pulse Operation:

   • For pulse operations, ensure the peak pulse current does not exceed 80A and the pulse width does not exceed 1ms.

6. Storage and Packaging:

   • Store in a dry environment to prevent corrosion.
   • Follow anti-static precautions to protect against ESD damage.

7. Testing and Validation:

   • Before final assembly, perform testing under conditions similar to the intended application.
   • Validate all connections and parameters meet the specifications outlined in this table.

(For reference only)