Details

---

BUY LM143H/883Q https://www.utsource.net/itm/p/6588289.html
N/A

Parameter	LM143H/883Q Specifications
Device Type	High-Voltage, High-Speed Operational Amplifier
Supply Voltage (V)	±15V to ±18V
Bandwidth (MHz)	8.5 MHz
Slew Rate (V/μs)	6 V/μs
Input Offset Voltage (mV)	2 mV max at 25°C
Input Bias Current (nA)	8 nA max at 25°C
Output Swing (V)	±13.5V (with ±15V supplies)
Operating Temperature Range (°C)	-40 to +85
Package Type	SOIC-8, PDIP-8

Instructions for Use:

1. Power Supply Connection: Connect the power supply pins to appropriate voltage levels as specified in the supply voltage range. Ensure proper decoupling capacitors are placed close to the power supply pins.
2. Input Signal Handling: Be cautious with input signals; they should not exceed the supply voltages to prevent damage. Input bias current is low but must be considered in high-impedance circuits.
3. Output Load Matching: The output can swing close to the supply rails but ensure the load impedance is compatible to achieve this performance.
4. Thermal Management: Operate within the specified temperature range. For extended temperature ranges or high-power applications, consider thermal management solutions like heatsinks.
5. Layout Considerations: Maintain short leads and use a ground plane to minimize noise and improve stability.
6. Storage and Handling: Store in recommended conditions and handle with care to avoid ESD damage.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed information specific to your application.

(For reference only)