Details

---

BUY CLC014AJE https://www.utsource.net/itm/p/6645327.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating range	1.7	-	5.5	V
Input Voltage Range	VIN	With respect to GND	-0.3	-	VDD+0.3	V
Output Current	IOUT	Continuous, per output	-	200	400	mA
Quiescent Current	IQ	All outputs high-Z	-	80	120	μA
Shutdown Current	ISD	VEN = 0V	-	1	5	μA
Propagation Delay	tPD	Typical, per channel	-	6	10	ns
Channel-to-Channel Skew	tSKEW	Maximum, between any two channels	-	-	1	ns
Output Low Voltage	VOL	IO = 4mA, VDD = 5V	-	0.4	0.8	V
Output High Voltage	VOH	IO = -4mA, VDD = 5V	4.2	-	5	V

Instructions for CLC014AJE:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the operating range of 1.7V to 5.5V.
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Input Signals:

   • Apply input signals within the range of -0.3V to VDD + 0.3V relative to GND.
   • Inputs can be driven by standard logic levels compatible with the supply voltage.

3. Output Configuration:

   • The device supports up to 400mA output current per channel in continuous operation.
   • Outputs are high impedance (high-Z) when disabled or not actively driven.

4. Quiescent and Shutdown States:

   • When all outputs are in high-Z state, the quiescent current should be around 80μA to 120μA.
   • To enter shutdown mode, set the enable pin (VEN) to 0V, reducing the current draw to 1μA to 5μA.

5. Timing Considerations:

   • Account for a propagation delay of 6ns to 10ns for signal transitions.
   • Ensure that the maximum skew between any two channels does not exceed 1ns for synchronized operations.

6. Output Levels:

   • For reliable low-level output, ensure the voltage does not exceed 0.8V at 4mA load.
   • For reliable high-level output, ensure the voltage is at least 4.2V at -4mA load when VDD is 5V.

7. Handling and Storage:

   • Follow standard precautions for handling electrostatic sensitive devices (ESDs).
   • Store in a dry environment and follow manufacturer guidelines for long-term storage.

(For reference only)