Details

---

BUY TEA18363T https://www.utsource.net/itm/p/6785051.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating voltage range
Load Switch Current Limit	ILIM	-	300	-	mA	Maximum current through load switch
UVLO Threshold	VUVLO	2.1	-	2.3	V	Undervoltage lockout threshold
Active High Enable Input	EN	-	-	-	-	Enable pin, active high
Thermal Shutdown	TSD	-	160	-	°C	Temperature at which thermal shutdown occurs
Quiescent Current	IQ	-	40	-	μA	Current consumption in quiescent state
Propagation Delay	tpd	-	1.5	-	μs	Time delay from input to output

Instructions for TEA18363T:

1. Power Supply: Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
2. Enable Pin: The device operates when the enable pin (EN) is high. Set this pin high to activate the device.
3. Load Connection: Connect the load between the load switch and ground. Ensure the current does not exceed 300mA to avoid damage.
4. Thermal Management: Monitor the operating temperature. The device will automatically shut down if it exceeds 160°C.
5. Undervoltage Lockout: The device will not operate if the supply voltage drops below the UVLO threshold (2.1V to 2.3V).
6. Low Power Consumption: The device consumes only 40μA in its quiescent state, making it suitable for low-power applications.
7. Propagation Delay Consideration: Account for a typical propagation delay of 1.5μs when designing timing-sensitive circuits.

(For reference only)