Details

---

BUY ER1002FCT https://www.utsource.net/itm/p/6793464.html

Parameter	Description	Value
Part Number	Electronic component identifier	ER1002FCT
Type	Device type	Relay
Coil Voltage	Voltage required to activate the relay	5V DC
Contact Form	Configuration of the relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC
Coil Resistance	Resistance of the coil	70Ω
Operating Temp.	Temperature range for operation	-40°C to 85°C
Insulation Voltage	Voltage withstand capability between contacts	1000V AC
Package/Case	Physical dimensions or package type	DIP-14

Instructions:

1. Installation: Ensure the relay is mounted on a suitable PCB with appropriate spacing to avoid interference.
2. Coil Connection: Connect the coil terminals to a 5V DC power supply to activate the relay.
3. Contact Wiring: Wire the common (COM), normally open (NO), and normally closed (NC) contacts as per your circuit requirements.
4. Testing: Before full-scale deployment, test the relay in a controlled environment to ensure it meets operational standards.
5. Maintenance: Regularly inspect the relay for signs of wear or damage, especially if used in high-cycle applications.
6. Storage: Store in a dry, cool place away from direct sunlight and corrosive materials when not in use.

(For reference only)