Details

---

BUY FMEN-220B https://www.utsource.net/itm/p/6793958.html

Parameter	Description	Specifications
Part Number	Full part number	FMEN-220B
Type	Device type	Electromagnetic Relay
Coil Voltage	Operating voltage of the coil	24V DC
Coil Power	Power consumption of the coil	1.2W
Contact Form	Configuration of relay contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250V AC / 24V DC
Insulation Voltage	Dielectric strength between contacts	2500V AC for 1 minute
Operating Temperature	Range of ambient temperature	-40°C to +85°C
Storage Temperature	Range of storage temperature	-40°C to +85°C
Mechanical Life	Number of operations before failure	10 million operations
Electrical Life	Number of operations under load before failure	100,000 operations
Dimensions	Size of the component	22.2mm x 13.2mm x 12.6mm
Weight	Weight of the component	7g

Instructions:

1. Installation:

   • Ensure that the relay is installed in a location where it will not be exposed to excessive heat, moisture, or mechanical shock.
   • Mount the relay on a flat, stable surface to avoid any misalignment issues.

2. Connection:

   • Connect the coil terminals to the appropriate control circuit using wires that are rated for the operating voltage and current.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to the application requirements.

3. Operation:

   • Apply the specified coil voltage to activate the relay. The contacts will switch according to the contact form (SPDT).
   • Ensure that the load connected to the relay does not exceed the contact rating to prevent damage or malfunction.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry cloth; do not use solvents or abrasive materials.

5. Disposal:

   • Dispose of the relay in accordance with local regulations for electronic components.

(For reference only)