Details

---

BUY MBRF20L100CT https://www.utsource.net/itm/p/6794079.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Repetitive Peak Reverse Voltage	VRRM				100	V
RMS Voltage	VRMS				70.7	V
Average Rectified Output Current (Tc = 100°C)	IO(AV)	f = 50/60 Hz, resistive load	20			A
Non-repetitive Surge Current	IFSM	tp = 8.3 ms sine half wave	400			A
Forward Voltage	VF	IF = 1 A	0.7			V
Reverse Current	IR	VRRM = 100 V			100	μA
Junction Operating Temperature	TJ		-55		150	°C
Storage Temperature	TSTG		-65		150	°C

Instructions for MBRF20L100CT:

1. Handling and Storage:

   • Store the device in a dry place within the temperature range of -65°C to 150°C.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure that the mounting surface is clean and free from contaminants.
   • Apply appropriate thermal paste if necessary for heat dissipation.

3. Electrical Connections:

   • Connect the device ensuring correct polarity.
   • Use appropriately rated wires and connectors to handle the current and voltage specifications.

4. Operating Conditions:

   • Operate within the specified temperature range (-55°C to 150°C).
   • Do not exceed the maximum repetitive peak reverse voltage (100V) or average rectified output current (20A).

5. Surge Protection:

   • For non-repetitive surge conditions, ensure the surge current does not exceed 400A for 8.3 ms sine half-wave pulses.

6. Testing:

   • Verify all connections are secure and correct before applying power.
   • Perform initial testing at reduced voltages/currents to ensure proper operation.

7. Maintenance:

   • Regularly inspect connections and mounting surfaces for signs of wear or corrosion.
   • Replace the device if any physical damage or performance degradation is observed.

(For reference only)