Details

---

BUY SP3232EEY https://www.utsource.net/itm/p/6800401.html

Parameter	Min	Typ	Max	Unit	Description
Supply Voltage (VCC)	4.75		5.25	V	Operating supply voltage
Output Current (IOL)		10		mA	Output current, low level
Input Current (IIH)		1		μA	Input current, high level
Data Rate			120	kbps	Maximum data rate supported
ESD Protection			±15	kV	Electrostatic discharge protection
Operating Temperature	-40		85	°C	Temperature range for operation
Storage Temperature	-65		150	°C	Temperature range for storage

Instructions for SP3232EEY:

1. Power Supply Connection: Connect the VCC pin to a stable 5V power supply and GND to ground. Ensure the supply voltage remains within the specified range of 4.75V to 5.25V.
2. Signal Lines: Connect the transmit (TX) and receive (RX) lines to the corresponding pins on the device you are interfacing with. Ensure signal integrity by using proper termination resistors if necessary.
3. ESD Precautions: Handle the device with care, especially in environments prone to static electricity. Use anti-static wrist straps and mats.
4. Temperature Considerations: Operate the device within the temperature range of -40°C to 85°C. For long-term storage, ensure temperatures do not exceed -65°C to 150°C.
5. Data Rate: The device supports a maximum data rate of 120 kbps. Adjust your communication settings accordingly to avoid errors.
6. Current Specifications: Be aware of the output and input current specifications to prevent damage or malfunction. Output currents should not exceed 10mA, and input currents should remain below 1μA at high levels.

(For reference only)