Details

---

BUY AD7511DIKN https://www.utsource.net/itm/p/6804935.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Normal Operation	4.5		18	V
Output Voltage Swing	VOUT	RL = 2kΩ			0.1	V
Differential Nonlinearity	DNL	Full Scale, VREF = 10V	-1		+1	LSB
Integral Nonlinearity	INL	Full Scale, VREF = 10V	-1		+1	LSB
Settling Time	tSET	To 0.01%, VREF = 10V		30		ns
Power Dissipation	PD	All Outputs at Mid-Scale			260	mW
Operating Temperature	Toper	Industrial Range	-40		+85	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 4.5V to 18V for optimal performance.

2. Output Configuration:

   • Connect a load resistor (RL) of 2kΩ for achieving the specified output voltage swing.

3. Calibration and Linearity:

   • Verify differential nonlinearity (DNL) and integral nonlinearity (INL) are within ±1 LSB under full-scale conditions with a reference voltage (VREF) of 10V.

4. Timing Considerations:

   • Allow a settling time of approximately 30ns to achieve 0.01% accuracy when transitioning between output levels.

5. Thermal Management:

   • Monitor power dissipation; it should not exceed 260mW under normal operating conditions to avoid overheating.

6. Environmental Conditions:

   • Operate within the temperature range of -40°C to +85°C to ensure reliable performance.

7. Reference Voltage:

   • Use a stable reference voltage (VREF) of 10V for accurate conversions.

Note: Always refer to the specific application notes and detailed datasheet provided by Analog Devices for comprehensive guidance on using the AD7511DIKN.

(For reference only)