Details

---

BUY NT5TU64M16HG-AC https://www.utsource.net/itm/p/6805787.html

Parameter	Description
Product Name	NT5TU64M16HG-AC
Type	DDR4 ECC Registered DIMM
Capacity	64GB (4GB x 16)
Module Type	RDIMM
Speed	2933 MT/s
Voltage	1.2V
CAS Latency (CL)	CL20
RAS# to CAS# Delay	tRCD 20
Row Precharge Time	tRP 20
Row Active Time	tRAS 38
Cycle Time	tRC 58
Refresh Rate	7.8us (Default)
Operating Temperature	0°C to 85°C
Thermal Sensor	Yes
Error Correction	ECC (Error Correcting Code)
Rank	Dual Rank
Compatibility	Compatible with Intel and AMD server platforms supporting DDR4 RDIMM modules

Instructions:

1. Installation:

   • Ensure the system is powered off before installation.
   • Align the module's notch with the slot's key on the motherboard.
   • Press firmly until the clips on both sides of the slot snap into place.

2. BIOS Update:

   • Check if a BIOS update is required for optimal performance with this memory module.
   • Follow the manufacturer’s guidelines for updating the BIOS.

3. Configuration:

   • Verify that the system recognizes the installed memory capacity and speed in the BIOS setup.
   • Configure any necessary settings for ECC and memory timings as per system requirements.

4. Cooling:

   • Ensure adequate airflow within the system case to maintain operating temperatures within the specified range.

5. Troubleshooting:

   • If the system fails to boot, check the memory seating and ensure all connections are secure.
   • Consult the motherboard or system manual for specific error codes related to memory issues.

(For reference only)