Details

---

BUY ME4936 https://www.utsource.net/itm/p/6832423.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Quiescent Current	IQ	-	10	-	μA	Current consumption in quiescent state
Output Voltage	VOUT	-	3.3	-	V	Regulated output voltage
Dropout Voltage	VDROPOUT	-	300	-	mV	Voltage difference between input and output for regulation
Load Regulation	-	-	0.5	-	%	Change in output voltage with load change
Line Regulation	-	-	0.01	-	%/V	Change in output voltage with input voltage change
PSRR	-	-	60	-	dB	Power Supply Rejection Ratio at 1 kHz
Operating Temp	Toper	-40	-	85	°C	Operating temperature range

Instructions:

1. Power Supply Connection: Connect the positive terminal of the power supply to the VIN pin and the negative terminal to GND.
2. Output Configuration: The VOUT pin provides the regulated output voltage. Connect this pin to the load or circuit requiring the regulated voltage.
3. Capacitor Requirements: Place a 1 μF capacitor between VIN and GND close to the device for stability. An additional 1 μF capacitor between VOUT and GND is recommended for better transient response.
4. Heat Dissipation: Ensure adequate heat dissipation if operating near the maximum input voltage and current, especially in environments approaching the upper limit of the operating temperature range.
5. Layout Considerations: Keep the layout compact and minimize trace lengths from VIN to VOUT to reduce noise and improve efficiency.
6. Storage and Handling: Store in a dry environment and handle with care to avoid damage from electrostatic discharge (ESD).

(For reference only)