Details

---

BUY UPC4741C https://www.utsource.net/itm/p/6902275.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	4.5	10	16	V	Operating supply voltage range
Input Offset Voltage	Vio		5		mV	Maximum input offset voltage
Input Bias Current	Ib		20		nA	Typical input bias current
Input Offset Current	Ios		5		nA	Maximum input offset current
Large Signal Voltage Gain	Av		200		dB	Large signal voltage gain
Slew Rate	SR		0.3		V/μs	Slew rate
Output Short-Circuit			Yes			Output short-circuit protection
Operating Temperature	Temp	-40		85	°C	Operating temperature range

Instructions for UPC4741C

1. Supply Voltage Connection:

   • Connect the supply voltage (Vcc) between 4.5V and 16V to the power pins of the UPC4741C.

2. Input Connections:

   • Ensure that the input signals do not exceed the supply voltage range to prevent damage.
   • Keep input bias currents low by using high impedance sources.

3. Output Usage:

   • The output can be connected directly to a load, but ensure it is within the specified operating parameters.
   • Be aware of the slew rate limitations when designing circuits requiring fast response times.

4. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.

5. Protection Circuits:

   • Utilize the built-in output short-circuit protection to safeguard against accidental shorts in the circuit.

6. Installation:

   • Handle with care during installation to avoid damage to the sensitive internal components.
   • Ensure proper heat sinking if operating at higher temperatures or under heavy loads.

(For reference only)