Details

---

BUY NF-410-N-A2 https://www.utsource.net/itm/p/6917798.html

Parameter	Description	Value
Part Number	Unique identifier for the component	NF-410-N-A2
Type	Category of the device	Relay
Coil Voltage	Voltage required to activate the relay coil	24VDC
Coil Current	Current drawn by the relay coil	35mA
Contact Form	Configuration of relay contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Voltage	Dielectric strength between contacts	2500VAC
Operating Temp.	Temperature range for reliable operation	-40°C to +85°C
Mounting Style	Method of mounting the relay	PCB mount
Dimensions	Physical size of the relay	17.5mm x 12.5mm x 12.5mm
Weight	Weight of the relay	5g

Instructions:

1. Installation:

   • Ensure that the operating environment temperature is within the specified range (-40°C to +85°C).
   • Mount the relay on a compatible printed circuit board (PCB) using standard soldering techniques.

2. Coil Activation:

   • Apply the specified coil voltage (24VDC) to activate the relay. Ensure not to exceed the maximum coil current (35mA).

3. Contact Usage:

   • Connect load circuits to the appropriate contact terminals based on the SPDT configuration.
   • Do not exceed the contact rating (10A, 250VAC) to prevent damage or malfunction.

4. Testing:

   • After installation, test the relay under no-load conditions to ensure proper operation.
   • Gradually increase the load to the rated capacity while monitoring performance.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Keep the relay free from dust and debris to ensure optimal performance.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.

(For reference only)