Details

---

BUY MC34072L https://www.utsource.net/itm/p/6939330.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	2.0		40	V
Input Offset Voltage	Vos	Vcc = 5V	1	3	5	mV
Input Bias Current	Ib	VI = 0V	10	25	60	nA
Input Offset Current	Ios	VI = 0V	2	7	15	nA
Output Short-Circuit Current	Isc	Vcc = 5V			20	mA
Slew Rate	SR			0.3		V/μs
Common-Mode Rejection Ratio	CMRR	f = 1kHz	80			dB
Power Supply Rejection Ratio	PSRR	f = 120Hz	90			dB
Bandwidth (Unity Gain)	GBW			1.1		MHz
Large Signal Voltage Gain	Avo	RL = 2kΩ, Vcc = 5V		200		kV/V

Instructions for MC34072L:

1. Power Supply:

   • Ensure the supply voltage is within the range of 2.0V to 40V.
   • Connect decoupling capacitors close to the power supply pins to minimize noise.

2. Input Signals:

   • Keep input signals within the common-mode input voltage range to avoid distortion and ensure accurate operation.
   • For best performance, input bias currents should be considered when selecting external resistors.

3. Output Configuration:

   • The output can drive loads directly but should not exceed the short-circuit current limit of 20mA.
   • Use appropriate load resistors to match the output impedance requirements.

4. Frequency Response:

   • The bandwidth is typically 1.1MHz at unity gain. Adjust the gain settings according to the application requirements.
   • Consider the slew rate limitations for large signal applications.

5. Stability and Compensation:

   • External compensation may be necessary for stability in high-gain or capacitive load conditions.
   • Refer to the datasheet for detailed compensation network design guidelines.

6. Handling Precautions:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper soldering techniques and temperature limits during installation.

For detailed specifications and advanced usage, refer to the manufacturer's datasheet.

(For reference only)