Details

---

BUY MC14584BCP https://www.utsource.net/itm/p/6940439.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.0		6.0	V
Output Current	IO	Per output, Vo = 0V		100		μA
Propagation Delay Time	tpd	VDD = 5V, TA = 25°C	30		90	ns
Power Dissipation	PD			700		mW
Operating Temperature	TA		-40		85	°C

Instructions for MC14584BCP

1. Power Supply: Ensure the supply voltage (VDD) is within the operating range of 2.0V to 6.0V. The device is designed to operate optimally at a typical power dissipation of 700mW.

2. Output Handling: Each output can source up to 100μA. Design your circuit ensuring that the load connected to the outputs does not exceed this current limit.

3. Timing Considerations: For accurate timing applications, account for the propagation delay time (tpd). At VDD = 5V and ambient temperature (TA) of 25°C, the propagation delay ranges from 30ns to 90ns.

4. Temperature Range: The device is specified to operate reliably over a temperature range from -40°C to 85°C. Ensure that the application environment stays within these limits.

5. Installation: When mounting the component on a PCB, follow standard practices for CMOS devices to avoid damage due to electrostatic discharge (ESD).

6. Signal Integrity: To maintain signal integrity, especially in high-frequency applications, use proper layout techniques such as short traces, ground planes, and decoupling capacitors near the power pins.

7. Data Sheet Review: Always refer to the latest data sheet provided by the manufacturer for detailed specifications and additional guidelines specific to your application.

(For reference only)