Details

---

BUY LP611024CS-12 https://www.utsource.net/itm/p/6941097.html

Parameter	Description	Value	Unit
Part Number	LP611024CS-12
Package Type	CSP (Chip Scale Package)
Operating Voltage	Supply voltage range	2.7 to 5.5	V
Operating Current	Typical operating current	3	mA
Output Configuration	Single output configuration	Fixed 3.3V	V
Output Current	Continuous output current	800	mA
Quiescent Current	Current consumption in active mode	2.5	μA
Shutdown Current	Current consumption in shutdown mode	0.1	μA
Operating Temperature	Junction temperature range	-40 to +85	°C
Storage Temperature	Storage temperature range	-65 to +150	°C
Thermal Resistance (θJA)	Junction-to-ambient thermal resistance	90	°C/W

Instructions for Use:

1. Mounting and Soldering:

   • Ensure proper mounting and soldering techniques are used to avoid damage.
   • Follow the recommended footprint and soldering profile provided by the manufacturer.

2. Power Supply Connection:

   • Connect the input pin to a stable power supply within the specified operating voltage range.
   • Ensure adequate decoupling capacitors are placed close to the power pins.

3. Output Configuration:

   • The device is pre-configured for a fixed 3.3V output; no external components are required for this setting.

4. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at higher currents or temperatures.
   • Consider using a heatsink if necessary.

5. Shutdown Mode:

   • To enter shutdown mode, pull the enable pin low. This significantly reduces power consumption.

6. Storage and Handling:

   • Store in a dry environment and handle with care to prevent static damage.
   • Follow ESD handling guidelines during assembly and testing.

7. Testing and Validation:

   • Perform initial testing under controlled conditions to verify performance parameters.
   • Validate the design thoroughly before mass production.

(For reference only)