Details

---

BUY IS61LV5128AL-10KLI https://www.utsource.net/itm/p/6942079.html

Parameter	Description	Value
Device Type	High-Speed CMOS Low Voltage Static RAM	IS61LV5128AL-10KLI
Organization	Organization	512K x 8
Supply Voltage (Vcc)	Operating Supply Voltage	3.3V
Standby Current	Standby Current	5 μA (typical)
Active Current	Active Current	40 mA (typical)
Access Time (tAA)	Access Time	10 ns
Data Hold Time (tDH)	Data Hold Time	2 ns
Clock Cycle Time (tCYC)	Clock Cycle Time	10 ns
Package Type	Package	44-TSSOP
Operating Temperature	Operating Temperature Range	-40°C to +85°C
Write Cycle Time (tWC)	Write Cycle Time	10 ns
Data Setup Time (tDS)	Data Setup Time	5 ns
Output Enable Time (tOH)	Output Enable Time	2 ns
Power-down Mode	Power-down Mode	Yes, CE# and OE# control

Instructions:

1. Power Supply Requirements: Ensure the device is powered with a stable 3.3V supply. Check for proper decoupling capacitors near the power pins.
2. Addressing and Data Lines: Connect address lines A0-A18 and data lines DQ0-DQ7 as per your system design. Ensure signal integrity especially at higher frequencies.
3. Control Signals: Use the Chip Enable (CE#), Output Enable (OE#), and Write Enable (WE#) signals to control read/write operations. For power-down mode, set both CE# and OE# high.
4. Timing Considerations: Adhere to the specified timing parameters such as access time, setup, and hold times to ensure reliable operation. Violating these can lead to data corruption or unpredictable behavior.
5. Temperature Range: Operate within the specified temperature range (-40°C to +85°C) to maintain performance and reliability.
6. Installation and Handling: Handle the TSSOP package with care to avoid damage to pins. Follow standard ESD precautions during installation.

(For reference only)