Details

---

BUY EP610DC-25 https://www.utsource.net/itm/p/6942586.html

Parameter	Value	Description
Part Number	EP610DC-25	Model identifier
Type	DC Motor	Type of motor
Voltage	12V DC	Operating voltage
Current Draw	2.5A (max)	Maximum current consumption
Speed	3000 RPM (no load)	Rotational speed under no load
Torque	1.2 kgcm (stall torque)	Torque at stall condition
Shaft Diameter	6mm	Diameter of the output shaft
Shaft Length	12mm	Length of the output shaft
Encoder	Yes, 500 PPR	Presence and resolution of encoder
Dimensions	48 x 48 x 55 mm	Width x Height x Depth
Weight	150g	Weight of the motor

Instructions:

1. Power Supply: Connect the motor to a regulated 12V DC power supply.
2. Mounting: Secure the motor using the mounting holes provided on the body. Ensure it is firmly attached to prevent vibration damage.
3. Shaft Coupling: Attach your mechanical load or gears to the motor shaft carefully to avoid misalignment.
4. Encoder Connection: If using the encoder, connect it according to the pinout diagram provided in the datasheet for accurate feedback.
5. Operation: Start with light loads and gradually increase to ensure the motor operates within its specified parameters.
6. Maintenance: Regularly check connections and mounting for tightness and wear. Keep the motor clean from dust and debris.
7. Storage: Store in a dry, cool place when not in use.

(For reference only)