Details

---

BUY G84-303-A2 https://www.utsource.net/itm/p/6942856.html

Parameter	Value	Unit
Part Number	G84-303-A2
Type	Relay
Coil Voltage	24	VDC
Coil Power	1.4	W
Contact Form	SPDT
Contact Rating	10A @ 250VAC
Insulation Voltage	1000	VAC
Operating Temperature	-40 to 85	°C
Coil Resistance	1700	Ω

Instructions:

1. Installation:

   • Ensure the relay is installed in a location free from excessive heat, moisture, and mechanical vibration.
   • Mount the relay on a flat surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the appropriate control voltage source.
   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your application requirements.

3. Operation:

   • Apply the rated coil voltage to energize the relay, which will switch the contacts from NC to NO positions.
   • Remove the voltage to return the contacts to their default positions.

4. Maintenance:

   • Periodically inspect the relay for any signs of wear or damage.
   • Clean the relay contacts if necessary using a soft cloth and contact cleaner.

5. Safety Precautions:

   • Always disconnect power before performing any maintenance or wiring changes.
   • Do not exceed the maximum voltage and current ratings to avoid damage to the relay.

(For reference only)