Details

---

BUY SKIIP22NAB12T45 https://www.utsource.net/itm/p/6994549.html
NULL

Parameter	Value	Unit
Device Type	IGBT Module	-
Package	62x75mm Press-fit	-
Voltage Rating (VCES)	1200	V
Current Rating (IC)	450	A
Short Circuit Withstand	10	ms
Operating Temperature	-40 to +150	°C
Thermal Resistance	0.2	°C/W
Isolation Voltage	2500	Vrms

Instructions for SKIIP22NAB12T45:

1. Installation:

   • Ensure the installation area is clean and free of debris.
   • Use press-fit terminals as specified in the datasheet for reliable connections.

2. Handling:

   • Handle with care to avoid damage to the module.
   • Avoid exposing the module to extreme temperatures or humidity during storage and handling.

3. Mounting:

   • Mount the module on a heatsink to ensure proper heat dissipation.
   • Torque the mounting screws to the recommended specifications provided by the manufacturer.

4. Electrical Connections:

   • Connect the gate, emitter, and collector terminals correctly as per the circuit diagram.
   • Ensure all connections are secure and insulated to prevent short circuits.

5. Operational Precautions:

   • Do not exceed the maximum voltage and current ratings.
   • Implement adequate protection circuits to safeguard against overvoltage and short-circuit conditions.

6. Testing:

   • Perform initial testing at low power levels to verify correct operation.
   • Gradually increase power levels while monitoring performance parameters like temperature and output quality.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)