Details

---

BUY MHPM7A15A60A https://www.utsource.net/itm/p/6995076.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Continuous	4.5		60	V
Output Voltage	VOUT	Adjustable		0.8	55	V
Output Current	IOUT	Continuous			15	A
Switching Frequency	FSW	Fixed		600	600	kHz
Efficiency	η	VIN=12V, VOUT=5V, IOUT=10A	92			%
Quiescent Current	IQ	VIN=12V		70		μA
Operating Temperature	TOPR		-40		125	°C
Storage Temperature	TSTG		-65		150	°C

Instructions for MHPM7A15A60A

1. Input Voltage Connection:

   • Ensure the input voltage (VIN) is within the range of 4.5V to 60V.
   • Connect the positive terminal of the input voltage to the VIN pin and the negative terminal to GND.

2. Output Voltage Setting:

   • Adjust the output voltage (VOUT) using an external resistor divider network connected to the FB (Feedback) pin.
   • Refer to the datasheet for specific resistor values to achieve desired output voltages between 0.8V and 55V.

3. Output Current Limitation:

   • The device can provide up to 15A continuously. Ensure that the load does not exceed this limit to prevent damage or overheating.

4. Switching Frequency Configuration:

   • The switching frequency is fixed at 600kHz. No adjustments are required unless specified otherwise by the manufacturer.

5. Efficiency Considerations:

   • For optimal efficiency, operate the device within recommended parameters. Efficiency is typically highest around 92% when VIN=12V, VOUT=5V, and IOUT=10A.

6. Quiescent Current:

   • At a typical operating condition of VIN=12V, the quiescent current is about 70μA. This low current draw helps in reducing power loss during standby or light-load conditions.

7. Temperature Range:

   • Operate the device within the temperature range of -40°C to 125°C for reliable performance.
   • Store the device in environments where temperatures do not exceed -65°C to 150°C.

8. Safety Precautions:

   • Always ensure proper heat sinking if operating near the maximum output current or in high ambient temperatures.
   • Follow all guidelines provided in the datasheet for safe operation and handling.

(For reference only)