Details

---

BUY DSAI75-16B https://www.utsource.net/itm/p/7046019.html

Parameter	Description	Value
Part Number	Device identifier	DSAI75-16B
Type	Component type	Relay
Coil Voltage	Voltage required to energize the relay coil	24VDC
Coil Power	Power consumption of the coil	0.384W
Contact Form	Configuration of switch contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Resistance	Resistance between contacts and coil	>100MΩ at 500VDC
Dielectric Strength	Withstand voltage between contacts and coil	1500VAC for 1 minute
Operating Temperature	Temperature range for operation	-40°C to +85°C
Storage Temperature	Temperature range for storage	-40°C to +85°C
Mechanical Life	Expected number of operations before failure	10 million cycles
Electrical Life	Expected number of operations under load	100,000 cycles

Instructions:

1. Installation: Ensure that the relay is mounted on a flat surface with adequate ventilation. Avoid mounting in areas exposed to moisture or corrosive gases.
2. Connection: Connect the coil terminals to the specified coil voltage. Connect the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
3. Operation: Apply the rated coil voltage to energize the relay. The contacts will switch according to the contact form (SPDT). Ensure not to exceed the contact rating to prevent damage.
4. Maintenance: Regularly inspect the relay for signs of wear or damage. Clean dust and debris from the relay using compressed air. Do not use solvents as they may damage the relay.
5. Storage: Store the relay in a dry place within the specified storage temperature range. Avoid exposure to extreme temperatures and humidity.

(For reference only)