Details

---

BUY SGM8905YPMS10G/TR https://www.utsource.net/itm/p/7059596.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD		1.7		5.5	V
Quiescent Current	IQ	VDD = 3V, No Load		2.0		μA
Output Voltage Range	VOUT	VDD = 3V	0		VDD-1.2	V
Shutdown Current	ISD	VSD = VDD, VDD = 3V		0.01		μA
Slew Rate	SR	VDD = 3V, RL = 1kΩ		0.3		V/μs
Bandwidth	GBW	VDD = 3V, CL = 10pF		1.6		MHz
Input Offset Voltage	VOS	VDD = 3V	-2		2	mV
Input Bias Current	IB	VDD = 3V	-5		5	nA
Common Mode Rejection	CMRR	VDD = 3V, f = 0Hz		80		dB
Power Supply Rejection	PSRR	VDD = 3V, f = 1kHz		90		dB

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 1.7V to 5.5V.
   • Connect a bypass capacitor (e.g., 0.1μF) close to the power supply pins to stabilize the supply voltage.

2. Input Configuration:

   • The input common mode voltage range extends from ground to VDD - 1.2V.
   • Keep input signals within this range to avoid distortion or damage.

3. Output Configuration:

   • The output can swing from 0V to VDD - 1.2V.
   • For optimal performance, use a load resistor (RL) and consider adding an output capacitor if needed.

4. Shutdown Functionality:

   • To put the device into shutdown mode, apply VDD to the shutdown pin (VSD).
   • In shutdown mode, the current consumption drops to approximately 0.01μA.

5. Stability Considerations:

   • The amplifier is unity-gain stable.
   • For frequencies above DC, ensure that the feedback network provides adequate phase margin.

6. Handling Precautions:

   • Handle with care as ESD sensitive components.
   • Follow proper anti-static procedures during handling and installation.

7. Application Notes:

   • Refer to the datasheet for detailed application circuits and further recommendations.
   • Ensure all connections are secure and correct to prevent damage to the device.

(For reference only)