Details

---

BUY CM30AD42-12H https://www.utsource.net/itm/p/7190660.html

Parameter	Description	Value	Unit
Product Type	High-Sensitivity CMOS Linear Image Sensor
Model	CM30AD42-12H
Supply Voltage	Operating voltage range	2.7 to 3.6	V
Operating Current	Current consumption during operation	50	mA
Standby Current	Current consumption in standby mode	0.5	μA
Pixel Array Size	Total number of pixels	128 (H) x 128 (V)
Active Pixels	Number of active pixels	128 (H) x 128 (V)
Pixel Size	Dimension of each pixel	10	μm
Frame Rate	Maximum frame rate	60	fps
Sensitivity	Minimum light level required for effective operation	0.1	lux
Signal-to-Noise Ratio	Ratio indicating signal strength relative to background noise	45	dB
Power Dissipation	Maximum power dissipation	180	mW
Interface	Communication interface type	SPI
Operating Temperature	Range of temperatures where the device can operate effectively	-20 to +70	°C
Storage Temperature	Range of temperatures where the device can be stored without damage	-40 to +85	°C
Package Type	Type of packaging	LCC-16

Instructions:

1. Power Supply: Connect the sensor to a stable power supply within the specified voltage range (2.7 to 3.6V).
2. Initialization: Use the SPI interface to initialize the sensor according to the datasheet specifications.
3. Operation Mode: Set the operation mode via the SPI interface before starting data acquisition.
4. Data Acquisition: Capture image data by reading from the sensor through the SPI interface at the desired frame rate.
5. Standby Mode: To reduce power consumption, set the sensor to standby mode when not in use.
6. Temperature Considerations: Ensure the operating and storage environments are within the specified temperature ranges to avoid damage or malfunction.
7. Handling Precautions: Handle with care to prevent damage to the sensitive components. Avoid exposure to excessive moisture and static electricity.

(For reference only)