Details

---

BUY MCD95-16IO8B https://www.utsource.net/itm/p/7190684.html

Parameter	Description
Part Number	MCD95-16IO8B
Type	Digital I/O Module
Input Channels	16
Output Channels	8
Voltage Level	3.3V, 5V
Operating Voltage	24V DC
Current per Channel	20mA (max) for outputs
Isolation Voltage	2500Vrms (input to output)
Communication Interface	SPI, I2C
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Dimensions	100mm x 60mm x 20mm
Weight	100g

Instructions

1. Installation:

   • Ensure the power supply is turned off before installation.
   • Mount the module on a DIN rail or use stand-alone mounting options.
   • Connect the power supply wires to the designated terminals.

2. Wiring Inputs and Outputs:

   • Wire each input channel according to the device's requirements.
   • For outputs, connect the load between the output terminal and ground.
   • Ensure not to exceed the maximum current rating per channel.

3. Configuration:

   • Use the provided software or configure via communication interfaces (SPI, I2C).
   • Set up the desired input/output configurations as required by your application.

4. Testing:

   • Power on the system and verify all connections.
   • Test each input and output channel for proper operation.
   • Adjust settings if necessary through the configuration interface.

5. Maintenance:

   • Regularly inspect wiring and connections for signs of wear or damage.
   • Keep the environment within the operating temperature range to ensure reliability.
   • Refer to the troubleshooting section in the user manual for any issues.

(For reference only)