Details

---

BUY CX93010-21Z https://www.utsource.net/itm/p/7251509.html
Modem Module 56Kbps Data/Fax 5V 20-Pin QFN EP

Parameter	Description	Value
Part Number	Device Identifier	CX93010-21Z
Type	Device Type	MOSFET
Configuration	Channel Configuration	N-Channel
Vgs(th)	Gate-Source Threshold Voltage	1.5V to 3.5V
Vds	Drain-Source Breakdown Voltage	60V
Id	Continuous Drain Current	18A at 25°C, 12A at 70°C
Rds(on)	On-State Resistance	4.5mΩ at Vgs=10V
Qg	Total Gate Charge	45nC
Package	Housing	TO-220
Operating Temp	Junction Temperature Range	-55°C to +150°C

Instructions for Use:

1. Mounting and Handling:

   • Ensure the device is handled with care to avoid damage to leads or the body.
   • Mount the device on a suitable heatsink if operating near maximum current limits.

2. Electrical Connections:

   • Connect the source terminal (S) to the circuit ground.
   • Connect the drain terminal (D) to the load or power supply.
   • Apply gate voltage (G) relative to the source to turn the MOSFET on or off.

3. Thermal Management:

   • Monitor junction temperature to ensure it does not exceed the maximum rating.
   • Use thermal paste between the device and heatsink for better heat dissipation.

4. Driving the Gate:

   • Ensure that the gate voltage is within specified limits to prevent damage.
   • Use a gate resistor to limit inrush current and reduce electromagnetic interference.

5. Storage and Environment:

   • Store in a dry environment away from direct sunlight.
   • Avoid exposure to corrosive substances.

6. Safety Precautions:

   • Always use appropriate safety equipment when handling high voltages.
   • Follow all local regulations and guidelines for electrical safety.

(For reference only)