Details

---

BUY P82B715D https://www.utsource.net/itm/p/7252421.html
I2C Buffer 5V/9V 8-Pin SOIC Tube

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating Range	2.7	-	5.5	V
Standby Current	ISB	VDD = 3V	-	10	-	μA
Operating Current	IOP	VDD = 3V	-	200	-	μA
Input Leakage Current	IIH	VIN = VDD, TA=25°C	-	1	-	μA
Output Low Voltage	VOL	IOH = 4mA, TA=25°C	-	0.4	-	V
Output High Voltage	VOH	IOL = -4mA, TA=25°C	-	VDD-0.4	-	V

Instructions for P82B715D

1. Power Supply Requirements:

   • Ensure the supply voltage (VDD) is within the operating range of 2.7V to 5.5V.

2. Current Considerations:

   • The device operates with a typical current of 200μA when active and consumes about 10μA in standby mode at 3V supply voltage.

3. Input Handling:

   • Keep input leakage current (IIH) low, typically not exceeding 1μA at 25°C ambient temperature.

4. Output Levels:

   • When sourcing current, ensure the output high voltage (VOH) does not drop below VDD-0.4V.
   • When sinking current, ensure the output low voltage (VOL) remains below 0.4V.

5. Temperature Range:

   • The device is designed to operate optimally at an ambient temperature of 25°C. Ensure that the operational environment supports this condition for optimal performance.

6. Handling Static Electricity:

   • This component is sensitive to static electricity. Use appropriate precautions such as anti-static wrist straps and packaging during handling and installation.

7. Installation and Mounting:

   • Follow standard surface mount technology (SMT) procedures for mounting on PCBs. Ensure proper soldering techniques are used to prevent damage to the device.

8. Testing:

   • After installation, verify the functionality by checking the supply voltage, input/output levels, and current consumption against the specified parameters.

Note: Always refer to the manufacturer's datasheet for the most accurate and detailed information specific to your application.

(For reference only)