Details

---

BUY TSZ121ICT https://www.utsource.net/itm/p/7253140.html
Op Amp Single GP R-R I/O 5.5V 5-Pin SC-70 T/R

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.6	-	5.5	V
Input Offset Voltage	VOS	TA = +25°C, VI- = VI+ = 0V	-0.6	0	0.6	mV
Input Bias Current	IB	TA = +25°C, VIN = 0V	-	2	-	nA
Slew Rate	SR	RL = 1kΩ, CL = 10pF	-	0.3	-	V/μs
Bandwidth	f-3dB	G = +1, RF = 1MΩ, CL = 10pF	-	1.4	-	MHz
Output Voltage Swing	VOSWNG	RL = 1kΩ, VDD = 5V	0.8	-	4.2	V
Quiescent Current	IQ	No load	-	1.6	-	μA

Instructions for TSZ121ICT

1. Power Supply Requirements:

   • Ensure the supply voltage (VDD) is within the range of 1.6V to 5.5V.

2. Input Signal Handling:

   • Be mindful of the input offset voltage which can vary from -0.6mV to +0.6mV at room temperature.
   • The input bias current should be considered when designing circuits to avoid loading effects on signal sources.

3. Performance Considerations:

   • For optimal performance, use a gain configuration that matches the desired bandwidth and slew rate requirements.
   • The output voltage swing can reach up to 4.2V with a 1kΩ load and a 5V supply, ensuring adequate headroom for signal processing applications.

4. Current Consumption:

   • The quiescent current is typically 1.6μA, making this device suitable for low-power applications.

5. Operating Temperature:

   • Ensure the ambient temperature (TA) is maintained within the operational limits specified in the datasheet to maintain accuracy and reliability.

6. Capacitive Load Stability:

   • When using capacitive loads, ensure they are within the stability range to prevent oscillations or other undesirable behaviors.

(For reference only)