Details

---

BUY TLV1701AIDBVR https://www.utsource.net/itm/p/7263450.html
Comparator Single R-R I/P ±18V/36V Automotive Medical 5-Pin SOT-23 T/R

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	1.6	-	3.6	V
Input Offset Voltage	VIO	-0.5	0.2	1.0	mV	@ VCC = 3.0V
Input Bias Current	IB	-	10	50	pA	@ VCC = 3.0V
Slew Rate	SR	0.4	-	0.7	V/μs	@ VCC = 3.0V, RL=1kΩ
Bandwidth	fT	1.0	-	1.8	MHz	@ VCC = 3.0V, RL=1kΩ
Output Short-Circuit		-	-	-	-	Continuous to either supply rail
Quiescent Current	IQ	-	90	150	μA	@ VCC = 3.0V

Instructions for Using TLV1701AIDBVR

1. Supply Voltage Connection:

   • Connect the positive supply voltage (V_CC) between 1.6V and 3.6V to pin 8.
   • Ground pin 4.

2. Input Signals:

   • Apply input signals to pins 2 (inverting) and 3 (non-inverting).
   • Ensure input signals are within the common-mode voltage range of the device.

3. Output Configuration:

   • The output is available at pin 6.
   • For optimal performance, connect a load resistor (RL) between the output and ground or supply as required by your application.

4. Power-On Sequence:

   • Ensure V_CC is applied before any input signals to prevent potential damage or erratic behavior.

5. Handling Static Electricity:

   • Handle the device with appropriate ESD precautions to avoid damaging sensitive components.

6. Operating Temperature Range:

   • The device is specified to operate over a temperature range of -40°C to +85°C. Ensure that operating conditions do not exceed these limits.

7. Storage and Handling:

   • Store in a dry environment and handle with care to avoid physical damage. Follow anti-static guidelines during handling.

(For reference only)